Click on the image to check the artwork
CONSTRUCTION:
Tube: oil resistant synthetic rubber.
Reinforcement: one high tensile steel braid.
Cover compound : braided high tensile textile blue cord.
2.Constant operation: -40 °C +100 °C
3.Application: medium pressure hydraulic lines, fuel oil, antifreeze solutions, air and water. Specially designed for high temperature applications.
Â
SAE 100 R5 shall consist of an inner tube of oil resistant synthetic rubber, a single wire braid reinforcement and a fiber braided cover.
Â
Â
This section covers hose for use with petroleum base hydraulic fluids within a temperature range of -40°C~+100°C
Â
Â
|
SIZE |
SAE |
I.D |
O.D |
W. P |
P.P |
B.P |
min B.R |
W.T |
|||||||
|
mm |
inch |
Dash |
Min |
Max |
Min |
Max |
Mpa |
Psi |
Mpa |
Psi |
Mpa |
Psi |
inch |
mm |
Kg/m |
|
5 |
3/16 |
-04 |
4.8 |
5.5 |
12.7 |
13.7 |
21 |
3045 |
42 |
6090 |
84 |
12180 |
2.95 |
75 |
0.24 |
|
6.3 |
1/4 |
-05 |
6.4 |
7.2 |
14.3 |
15.3 |
21 |
3045 |
42 |
6090 |
84 |
12180 |
3.35 |
85 |
0.28 |
|
8 |
5/16 |
-06 |
7.9 |
8.7 |
16.7 |
17.6 |
15.7 |
2270 |
31.5 |
4570 |
63 |
9135 |
3.94 |
100 |
0.35 |
|
11 |
13/32 |
-08 |
10.3 |
11.1 |
18.9 |
20.0 |
14 |
2030 |
28 |
4060 |
56 |
8120 |
4.53 |
115 |
0.38 |
|
13 |
1/2 |
-10 |
12.7 |
13.7 |
22.8 |
24.0 |
12.2 |
1770 |
24.5 |
3550 |
49 |
7105 |
5.51 |
140 |
0.51 |
|
16 |
5/8 |
-12 |
15.9 |
17.0 |
26.8 |
28.0 |
10.5 |
1520 |
21 |
3045 |
42 |
6090 |
6.50 |
165 |
0.68 |
|
22 |
7/8 |
-16 |
22.2 |
23.3 |
30.6 |
32.2 |
5.6 |
810 |
11.2 |
1620 |
22.4 |
3250 |
7.28 |
185 |
0.70 |
|
29 |
1 1/8 |
-20 |
28.6 |
29.8 |
37.3 |
38.9 |
4.3 |
620 |
8.7 |
1260 |
17.5 |
2540 |
9.06 |
230 |
0.80 |
|
35 |
1 3/8 |
-24 |
34.9 |
36.1 |
43.7 |
45.2 |
3.5 |
510 |
7 |
1015 |
14 |
2030 |
10.43 |
265 |
0.93 |
|
46 |
1 13/16 |
-32 |
46.0 |
47.2 |
55.2 |
57.6 |
2.4 |
350 |
4.9 |
700 |
9.8 |
1420 |
13.19 |
335 |
1.32 |
|
60 |
2 3/8 |
-40 |
60.3 |
61.9 |
71.8 |
74.2 |
2.4 |
350 |
4.9 |
700 |
9.8 |
1420 |
24.02 |
610 |
2.96 |
|
76 |
3 |
-48 |
76.24 |
77.8 |
89.3 |
91.7 |
1.4 |
200 |
2.8 |
410 |
5.6 |
810 |
33.07 |
840 |
4.10 |
Â
Hydraulic hose R5 is a specific type of high-pressure hose used in hydraulic systems. It is designed to convey hydraulic fluids under high pressure and is typically used in a variety of applications where flexibility, resistance to wear, and high performance are required. Here are some common applications of hydraulic hose R5:
Industrial machinery: R5 hydraulic hoses are often used in industrial machinery such as excavators, cranes, and forklifts. These hoses can handle the high pressure and flow rates required for the operation of these machines.
Agricultural equipment: Tractors, harvesters, and other agricultural equipment often rely on R5 hydraulic hoses to operate effectively in the field.
Construction equipment: Hydraulic hoses R5 are used in construction equipment such as loaders, backhoes, and concrete pumps, where they are subjected to harsh environments and high pressure.
Marine applications: Boats and ships use R5 hydraulic hoses for various systems, including steering, anchor winches, and other hydraulic equipment.
Automotive applications: Some automotive systems, such as clutch and brake systems, may use R5 hydraulic hoses to transfer fluid under high pressure.
Aerospace industry: R5 hydraulic hoses are used in aerospace applications for operating flight control systems, landing gear, and other hydraulic systems on aircraft.
It's important to note that while R5 hydraulic hoses are versatile and can be used in a wide range of applications, it is essential to ensure that the hose is compatible with the specific hydraulic fluid, pressure, and temperature requirements of the system in which it will be used. Additionally, proper installation, maintenance, and regular inspection are crucial to ensure the safe and efficient operation of the hydraulic system.
Â
Â
Â
Â
Â
- Long History - 15 years experience in high-pressure SAE hydraulic hoses & low-pressure industrial rubber hoses area.
- OEM Service - We provide professional OEM service.
- Wonderful Team - Sales team to offer fast response and trading professional consultation service.
- High Quality - All rubber hoses are made of high-quality rubber raw material, such as NBR, SBR, EPDM, NR etc.
- Pickiest Quality Control - Our pickiest quality control team always make sure every hose is top grade in quality.
- Checking - We check the details of rubber hoses to make sure goods is a fine before deliver to you.
Â
http://www.lomoflexhydraulic.com/